Table of Contents
Advertisement
Settings & Controls for Recording
Erasing All Data From a DVD-RW Disc
DISC menu screen
DISC MENU
MENU
FINALIZE
CANCEL DISC FINALIZATION
AUTO FINALIZE
AUTO CANCEL DISC FINALIZ.
DISC ERASE
( QUICK )
DISC ERASE
( FULL )
LAST TITLE ERASE
DISC ERASE(QUICK)
Note
When either a new DVD-RW or one that
has been erased on another machine is
inserted, quick erase starts up.
Canceling the Finalization of a DVD-RW
When adding an extra recording to a finalized DVD-RW, cancel the finalization.
DISC menu screen
DISC MENU
MENU
FINALIZE
CANCEL DISC FINALIZATION
AUTO FINALIZE
AUTO CANCEL DISC FINALIZ.
DISC ERASE
( QUICK )
DISC ERASE
( FULL )
LAST TITLE ERASE
CANCELING DISC FINALIZATION
28
1.
Insert the DVD-RW from which data is to be erased.
2.
Press the SET UP button to display the Setup Menu.
CANCEL
3.
Use the 7 and 6 buttons to select DISC item and then press
CANCEL
the SET button.
OFF
OFF
● The DISC menu screen will appear.
EXECUTE
CANCEL
4.
Press the 7 or 6 button, select either the DISC ERASE (QUICK)
CANCEL
item or the DISC ERASE (FULL) item, then press the SET button.
● The setting value list box is displayed.
DISC ERASE (QUICK): Only the disc control area is erased. (Quick Erase)
DISC ERASE (FULL):
5.
Use the 7 and 6 buttons to select EXECUTE from the list and
then press the SET button.
● The erasing of data will begin.
The message "DISC ERASE" appears and the state of progress is displayed
using a progress bar.
● When all data has been erased, the progress bar will disappear.
CAUTION
● All of the data recorded to the disc will be erased in this process. Before
starting, therefore, confirm that no important data is stored on this disc.
● Under no circumstances should the power be turned off or the power cord
disconnected while data is being erased.
1.
Insert the DVD-RW whose finalization you want to cancel.
2.
Press the SET UP button and the set up top menu screen will be
CANCEL
displayed.
EXECUTE
OFF
OFF
3.
Press the 7 or 6 button to select the DISC item, then press the
CANCEL
SET button.
CANCEL
● The DISC menu screen is displayed.
CANCEL
4.
Press the 7 or 6 button, and select the CANCEL DISC
FINALIZATION item, then press the SET button.
● The setting value list box is displayed.
5.
Press the 7 or 6 button, select EXECUTE from the list box,
then press the SET button.
● Cancellation of finalization starts.
Execution status will be displayed on a progress bar.
● When complete, the progress bar disappears.
Notes
● When canceling finalization the TOP MENU created when finalizing is
deleted.
● Discs finalized on another machine cannot be cancelled.
Compared with Full Erase the time to erase is
shorter.
All areas of the disc are erased. (Full Erase) This
setting is recommended for repeated use of a disc.
Advertisement
Table of Contents
