Basic Operation; TurnNg The Power On; Channel SelectOn - Icom IC-F5062D Instruction Manual

■ Turning the power ON
q Hold down [ ] for 1 second to turn the power ON.
w If the transcever s programmed for a start up password,
nput the dgt codes as drected by your dealer.
• The keys as below can be used for password nput:
The transcever detects numbers n the same block as dentcal.
Therefore "01234" and "56789" are the same.
KEY
0 1
NUMBER
5 6
e When the "PASSWORD" ndcaton does not clear after
nputtng 6 dgts, the nput code number may be ncorrect.
Turn the power OFF and start over, n ths case.
2 3 4
7 8 9

BASIC OPERATION

■ Channel selection
Several types of channel selecton are avalable. Methods
may dffer, accordng to your system set up.
NON-ZONE TYPE:
To select the desred operatng channel:
• Push [CH Up] or [CH Down].
• Push one of [MR-CH 1] to [MR-CH 4].
ZONE TYPE:
To select the desred zone:
• Push [Zone], then push [CH Up] or [CH Down].
• Push [Zone Up] or [Zone Down].
D Voting operation
The transcever automatcally starts scannng when a zone,
specfied for the votng operaton, s selected.
The votng scan detects the sgnal strength of the repeaters,
and automatcally selects the strongest one.
AUTOMATIC SCAN TYPE:
Channel settng s not necessary for ths type. When turnng
the power ON, the transcever automatcally starts scannng.
Scannng stops when recevng a call.
2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
8