Doc - Icom IC-F5062D Instruction Manual

4

DOC

The IC-F5062D and IC-F6062D comply wth
the essental requrements of the European
Rado and Telecommuncaton Termnal Drec-
tve 1999/5/EC.
21 21
We Icom Inc. Japan
1-1-32, Kamiminami, Hirano-ku
Osaka 547-0003, Japan
Declare on our sole responsibility that this equipment complies with the
essential requirements of the Radio and Telecommunications Terminal
Equipment Directive, 1999/5/EC, and that any applicable Essential Test
Suite measurements have been performed.
Kind of equipment : VHF TRANSCEIVER
Type-designation
(Variant name
136–174 MHz 12.5 KHz/25 KHz
136–174 MHz 12.5 KHz/20 KHz
136–174 MHz 6.25 KHz
Version (where applicable):
This compliance is based on conformity with the following harmonised
standards, specifications or documents:
i) EN 60950-1 2001
ii) EN 301 489-1 v1.4.1 (August 2002)
iii) EN 301 489-5 v1.3.1 (August 2002)
iv) EN 300 086-2 v1.1.1 (March 2001)
v) EN 300 219-2 v1.1.1 (March 2001)
vi) EN 300 113-2 v1.3.1 (December 2003)
vii) EN 301 166-2 v1.1.1 (December 2001)
DECLARATION
OF CONFORMITY
Düsseldorf 15th Feb. 2008
Place and date of issue
Authorized representative name
Y. Furukawa
General Manager
Signature
Ths warnng symbol ndcates that ths equp-
ment operates n non-harmonsed frequency
bands and/or may be subject to lcensng cond-
tons n the country of use. Be sure to check that
you have the correct verson of ths rado or the
correct programmng of ths rado, to comply wth
natonal lcensng requrement.