Overview - Cisco Nexus 93108TC-FX3 Hardware Installation Manual

Aci-mode switch

Hide thumbs Also See for Nexus 93108TC-FX3:

Table of Contents

Overview

•

Overview

The Cisco Nexus 93108TC-FX3 switch (N9K-C93108TC-FX3) is a 1-rack unit (RU) switch that supports

2.16 Tbps of bandwidth and 1.2 Bpps. The 48 10GBASE-T downlink ports on the 93108TC-FX3 can be

configured to work as 100-Mbps or 10-Gbps ports. The uplink can support up to six 40- and 100-Gbps ports,

or a combination of 10-, 25-, 40, and 100-Gbps connectivity, offering flexible migration options for

spine-leaf-APIC deployment in data centers. This switch supports the following ports:

• 48 100M/10GBASE-T ports (ports 1-48)

• 6 40/100-Gigabit ports QSFP28 (ports 49-54)

• Two management ports (one 10/100/1000BASE-T port and one SFP port)

• One console port (RS-232)

• 1 USB port

This switch includes the following user-replaceable components:

• Fan modules (four) with the following airflow choices:

Note

Overview, on page 1

• Port-side exhaust fan module with blue coloring (NXA-SFAN-35CFM-PE)

• Port-side intake fan module with burgundy coloring (NXA-SFAN-35CFM-PI)

This switch will power down due to a fan-policy trigger if fewer than 3 fans are

operational.

Each fan module has two rotors. The switch can function normally if one rotor

inside the any one fan module fails. In case of more than one rotor failure, the

switch will issue a warning and power down in 2 minute.

Cisco Nexus 93108TC-FX3 ACI-Mode Switch Hardware Installation Guide

C H A P T E R

Table of Contents