Connecting To The Web Gui Interface - Cisco SG300 Setup Manual

Cisco SG300 SETUP GUIDE
Connecting to the switch Web GUI Interface
V2 Panel Description
To login into the Cisco network switch the factory default details are:
IP Address: 192.168.1.254
User: cisco
Password: cisco
In order to connect to the network switch your computer will need to be physically connected to the Cisco switch using a Ethernet
network cable. The computer must also be in the same IP range as the Cisco switch default IP address. If you are unsure how to update your
computer IP range follow the 'Changing your computer IP address' instructions at the rear of this guide.
1) Open your internet browser (Google Chrome, Mozilla, Internet Explorer etc)
2) Type the network switch default IP address into the web browser bar
3) Enter the default user name and password
Note: If the switch is not using the factory default settings you will need to know these login details or have to factory reset the unit.
For details how to factory reset the network switch please refer to the networks switch user manual.
04
www.elanhomesystems.com