Table of Contents
Advertisement
Chapter 4
Interfacing to Your Round Card
80188EB-Based Fieldbus Round Card User Manual
Your RS-232 to TTL cable leading to the Round Card must be
attached to the COM port you specify. See the Interfacing to the
Hardware section, earlier in this chapter, for the connections of
serial port 1 on the user electronics connector.
The
utility contacts the Round Card and downloads your
niBurn
program into the Flash on the Round Card. The utility informs you
when it has completed.
4. After the application has downloaded, remove jumper B of W1
before resetting the Round Card.
4-8
© National Instruments Corporation
Advertisement
Table of Contents
