Configuring A Port - Intel NetStructure 470 User Manual

C H A P T E
NOTE
If you change the flow control or
IP settings, you must reboot the
switch before the new settings
can take effect.
32
R 4 Intel® NetStructure™ 470T and 470F Switches User Guide

Configuring a Port

You can use the Web Device Manager to enable or disable a port, and to
change its speed, duplex, flow control, and priority settings.
To change port settings
1 Click the Configure Device menu, and then click Port Settings. To
access the Port Settings for a port, click the port you want to configure
on the faceplate graphic.
2 In the boxes, click the options you want to change:
• Port State lets you enable or disable the port.
• Speed/Duplex lets you set port speed and duplex.
• Flow Control lets you enable or disable flow control.
• Priority Queue (802.1p) lets you set the switch priority queue for
packets sent or received on this port.
3 Click Submit.