To Connect A Headset (Optional); To Connect A Computer (Optional); Multi Settings Icon; Settings Icon - NEC DT900 Series User Manual

Figure 3.8
3
Figure 3.9
4
To connect a headset (Opt ional)
1
2
3
4
5
6
7
Figure 3.10 Headset Connector

To connect a computer (Optional)

DT900/DT900S Series Phone User Guide

Multi settings icon

Press the Settings icon.

Settings icon

1
Select User Settings.
For information on connecting a Jabra Bluetooth headset to your phone, refer
Note:
to the Bluetooth Support chapter in this manual.
Press the Menu key on the phone.
3
Select User Settings.
2
Select Headset.
1
Select Enable/Disable.
2
Select Enable.
b
Press Enter on the cursor pad or the OK softkey to accept the setting.
Insert the headset cord plug into the HEADSET connector on the back of the phone, until
you hear a click.
Any devices connected to the phone's PC port will momentarily disconnect
Note:
from the network when the phone is rebooted, or if disconnect if there is a loss
of power to the phone.
You can connect a computer to the network through the phone using a LAN cable if
there are a limited number of available ports on your local area network.
3-35