Attaching/Removing The Projection Lens - Panasonic PT-RQ25K Series Operating Instructions (Functional Manual)

Table of Contents

Advertisement

Chapter 2 Getting Started — Attaching/removing the projection lens

Attaching/removing the projection lens

Move the projection lens to the home position before replacing or removing the projection lens. (x page 91)
Attention
f Replace the projection lens after turning off the power of the projector.
f Do not touch the electric contacts of the projection lens. Dust or dirt may cause poor contact.
f Do not touch the surface of the projection lens with your bare hands.
f Before attaching the projection lens, remove the lens cover attached to the projection lens.
f Do not touch any area other than specified in "Adjusting the lens mounter when the focus is unbalanced" (x page 94) with the projection
lens removed. Touching around the projection lens mount inside the projector may result in malfunction.
f Do not attach the Fixed-focus Lens (Model No.: ET-D75LE5 (production discontinued)) to the projector. Attaching by mistake will cause
malfunction of the projector.
f Panasonic Connect Co., Ltd. takes no responsibility for any damage or malfunction of the product resulting from the use of projection lenses
which are not manufactured by Panasonic Connect Co., Ltd. Be sure to use the specified projection lenses.
Note
f The precautions for handling the lens are different for the Fixed-focus Lens (Model No.: ET-D75LE95). For details, refer to the Operating
Instructions of ET-D75LE95.
f When using the Zoom Lens (Model No.: ET-D3LEW200) or the Fixed-focus Lens (Model No.: ET-D3LEU100), it is recommended to use
together with the Lens Fixed Attachment (Model No.: ET-PLF20).
f When using the Fisheye Lens (Model No.: ET-D3LEF70), it is recommended to use together with the Lens Fixed Attachment (Model No.:
ET-PLF10).
f For the adjustment procedure of the focus, zoom, and lens shift after attaching the projector lens, refer to "Adjusting the focus, zoom, and
lens shift" (x page 86).
f For the adjustment procedure of the focus balance in the center and periphery of the projected image when the following projection lens is
used, refer to "Adjusting the focus balance" (x page 87).
g Zoom Lens (Model No.: ET-D3LEW10, ET-D3LEW60, ET-D3LEW200, ET-D75LE6)
g Fixed-focus Lens (Model No.: ET-D3LEW50, ET-D3LEU100, ET-D75LE50, ET-D75LE95)
g Fisheye Lens (Model No.: ET-D3LEF70)
f For the adjustment procedure of the focus balance between top, bottom, left, and right of the projected image, refer to "Adjusting the lens
mounter when the focus is unbalanced" (x page 94).
58 - ENGLISH

Advertisement

Table of Contents
loading

Table of Contents