Table of Contents
Advertisement
Start-up display
The initial setting screen is displayed when the projector is switched on for the first time after purchase as well as when [ALL USER DATA]
( x page 82) in [INITIALIZE] is executed. Set them in accordance with circumstances.
In other occasions, you can change the settings by menu operations.
Note
f When the projector is used for the first time, you may be required to adjust the lens zoom ring and focus ring of the projector ( x page 21)
to display the menu screen clearly.
Refer to "Adjusting the image" ( x page 36) for details.
Initial setting (display language)
Select the language to show on the screen. ( x page 59)
1)
Press as to select the display language.
2)
Press the <ENTER> button to proceed to the initial setting.
Initial setting (projector setup)
Set each item.
1)
Press as to select an item.
2)
Press qw to switch the setting.
f Refer to the following page for details of each item.
[PROJECTION METHOD] ( x page 70)
[COOLING CONDITION] ( x page 71)
[SCREEN FORMAT] ( x page 61)
[SCREEN POSITION] ( x page 61)
3)
Press the <ENTER> button.
f Fix the setting value to complete the initial setting.
Note
f If you press the <RETURN> button in the initial setting (display language) screen, you can go back to the initial setting (display language)
screen.
f [SCREEN FORMAT] and [SCREEN POSITION] can only be set on PT-RW330EA.
f To continue operations after completed the initial setting (projector setup), refer to "Selecting the input signal" ( x page 36).
f By default, the time zone of the projector is set to +09:00 (Japan and Korean Standard Time). Change the setting in the [PROJECTOR
SETUP] menu → [DATE AND TIME] → [TIME ZONE] to the time zone of the region where you use the projector.
Chapter 1 Preparation — Start-up display
ENGLISH - 19
Advertisement
Table of Contents
