Cancelling A Communication; Cancelling A Memory Transmission; Cancelling A Direct Feed Transmission - Olivetti d-Copia 23 Operation Manual

Cancelling a Communication

You can cancel a communication even if it is already in progress. The methods for cancelling a
communication differ depending on whether that communication is a fax transmission or a fax
reception, and whether that transmission was initiated using the Memory Transmission mode or the
Direct Feed Transmission mode. The following contains explanations on the various methods used for
cancelling communications.

(1) Cancelling a Memory Transmission

All transmissions accomplished in the Memory Transmission mode
are handled as operations in the background of the message display.
In order to cancel a background operation, it is first necessary to
make that operation appear in the message display. Perform the
following procedure to cancel this type of transmission.
Hold down the ALTERNATE DISPLAY key. The background
1 1
operation currently in progress will appear in the message
display.
:13579
01Page
Communicating
Press the Stop/Clear key while you are still holding the
2 2
ALTERNATE DISPLAY key down. The transmission will be
cancelled.
* If you attempt to cancel a transmission that is scheduled to
multiple destinations (such as a Broadcast Transmission)
and there were destinations still remaining to be transmitted
to, a message will appear in the message display asking
whether or not you want to continue the transmissions to the
remaining destinations.
> If you select "Yes", transmissions will be carried out to the
remaining destinations.
> If you select "No", or if you make no selection and the Auto
Clear function engages and clears the message display,
transmission to the remaining destinations will also be
cancelled as well.
<Related Communications>
The following types of transmission can be cancelled using this
procedure: Memory Transmission to a single destination, Broadcast
Transmission, Memory transmission to a relay station, Relay
Broadcast Transmission, Polling Transmission, Memory Confidential
Transmission, Memory Reverse Polling (the transmission operation),
Confidential Polling Transmission, F-Code Based Confidential
Transmission and F-Code Based Bulletin Board Transmission.
Doc. nr :056
Document:A4
Section 1 Basic Use of this Fax

(2) Cancelling a Direct Feed Transmission

All transmissions accomplished in the Direct Feed Transmission
mode are handled as operations in the foreground of the message
display. Therefore, the status of these transmissions are always
shown in the message display. Perform the following procedure to
cancel this type of transmission.
Check the status of the transmission currently in progress in
1 1
the message display.
:13579
01Page
Communicating
Press the Stop/Clear key. The transmission will be cancelled.
2 2
* If the documents are being transmitted from the SRDF, that
document currently being transmitted will be ejected onto the
top cover of the SRDF.
<Related Communications>
The following types of transmissions can be cancelled using this
procedure: Direct Feed Transmission to a single destination, Direct
Feed transmission to a relay station, Direct Feed Confidential
Transmission, Direct Feed Reverse Polling (the transmission
operation) and Direct Feed F-Code Based Confidential Transmission.
Doc. nr :056
Document:A4
1-25