Blocking Reception Of Unwanted Faxes - Sharp FO-2550 Operation Manual

Blocking Reception of Unwanted Faxes

The Anti Junk Fax function allows you to block reception of faxes
from parties which you specify. This saves paper by not printing out
unwanted "junk" faxes.
To use this function, first turn it on by setting Option Setting 13 (Junk
Fax # Check) to YES as described in Chapter 8, and then enter the fax
numbers from which you do not want to receive faxes as shown below.
Comments:
Up to 5 numbers can be entered in the Anti Junk Number List.
To clear a number from the Anti Junk Number List, you need to
know the 1-digit number which identifies it. If you have forgotten
this number, print out the Anti Junk Number List as described in
Chapter 9.
1
Press the keys shown at right.
STORE JUNK FAX # will appear in
the display.
2
Press 1 to store a number in the Anti
Junk Number List, or 2 to clear a
number from the list.
3
Storing: Enter a 1-digit number from
1 to 5. This number identifies the fax
number you will store in the next step.
Clearing: Enter the number which
identifies the fax number you want to
clear, and go to Step 5.
or
(Example)
7-13