Fax
Adjusting the fax darkness
Note: Make sure that fax is configured. For more information, see the
1
Load an original document into the ADF tray or on the scanner glass.
2
From the home screen, touch Fax, and then enter the needed information.
3
Touch Settings > Darkness > adjust the setting.
4
Send the fax.
Printing a fax log
Note: Make sure that fax is configured. For more information, see the
1
From the home screen, touch Settings > Reports > Fax.
2
Touch Fax Job Log or Fax Call Log.
Blocking junk faxes
Note: Make sure that fax is configured. For more information, see the
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls.
2
Set Block No Name Fax to On.
Holding faxes
Note: Make sure that fax is configured. For more information, see the
1
From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Holding Faxes.
2
Select a mode.
Forwarding a fax
Note: Make sure that fax is configured. For more information, see the
1
Create a destination shortcut.
a
Open a web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the home screen. The IP address appears as four sets of numbers
separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the web page correctly.
b
Click Shortcuts > Add Shortcut.
Setting up the printer to fax
Setting up the printer to fax
Setting up the printer to fax
Setting up the printer to fax
Setting up the printer to fax
86
section.
section.
section.
section.
section.