Making Colour Copies - Sharp FO-2550 Operation Manual

Note: If you place a large number of originals in the feeder, the
memory may become full before all of them can be scanned
(MEMORY IS FULL will appear in the display). If this happens,
press the START key to copy the originals which have been
scanned, and then repeat the copy procedure for the remaining
originals, including the original which was being scanned when the
memory became full.

Making colour copies

Colour copy mode is automatically selected when a colour print
cartridge is installed.
One colour copy per original can be made. In addition to plain and
coated paper, you can also make copies on transparencies and glossies.
(Note: For copying, the print media must be legal, letter, or A4 size.)
1
If you are copying onto a
transparency, glossy, or paper
different from the paper in the paper
tray, flip up the document tray and
insert the transparency or paper into
the manual paper feeder. Push the
media in until the feeder draws the
leading edge in slightly.
The display will show:
CHECK MAN FEEDER
USE AUTO FOR RX
Making Copies
5-7