Sharp FO-2550 Operation Manual page 155

If Option Setting 16 (Auto Print Out) is set to YES, a report will
be automatically printed out whenever information on 30
operations has accumulated. (A report can still be printed on
demand at any time.)
All information is erased after a report is printed out. If automatic
print-out is turned off and print-out has not been done manually
for 30 operations, the information on the oldest operation will be
overwritten each time a new operation is performed.
Explanation of headings
SENDER/ The fax number of the other machine involved in the
RECEIVER transaction. If this machine does not have an ID function,
the communication mode will appear (for example, "G3").
PAGES Number of pages transmitted or received.
NOTE OK - Transmission/reception was normal.
P.FAIL - A power failure occurred. If you have power
and the problem persists, try a different outlet. If
necessary, have an electrician check your power lines.
JAM - A problem with the paper or original document
occurred. Make sure the paper or document is loaded
properly. Make sure the operation panel is shut securely.
NO PAPER - You ran out of paper during reception.
Printing Reports and Lists
9-3