Enabling Headset Memory Mode; Using Electronic Hookswitch - Polycom SoundPoint IP 32x User Manual

SoundPoint IP 32x/33x User Guide

Enabling Headset Memory Mode

This feature is especially useful for permanent or full-time headset users. You can set up your phone so
that all incoming and outgoing calls use your headset. At any time, you can switch to handset or
speakerphone mode.
Web Info: Supported Headsets
For a list of supported headsets, see
1500 Headset Compatibility
To use Headset Memory Mode, you must enable, and then activate, Headset Memory Mode. When
Headset Memory Mode is activated, the Headset key flashes.
To enable Headset Memory Mode:
1 Press the Menu key.
2 Select Settings > Basic > Preferences > Headset > Headset Memory.
3 Select Enabled and press the Select key to enable Headset Memory mode.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
• Press the Speakerphone key twice.
Pressing the Line Key or Answer soft key to receive a call will now connect to your headset
automatically.

Using Electronic Hookswitch

If you use a headset that supports electronic hookswitch, you can place, answer, and end calls by
pressing the hookswitch button on your headset.
Web Info: Detailed Informations on How to Use Electronic Hookswitch
For detailed information about how to use electronic hookswitch, see
Using an Electronic Hookswitch with Polycom SoundPoint IP and VVX 1500
supported EHS headsets, see
Headset Compatibility
18
Technical Bulletin 37477: Polycom SoundPoint IP and VVX
List.
Technical Bulletin 37477: Polycom SoundPoint IP and VVX 1500
List.
Technical Bulletin 35150:
Phones. To see a list of