Adjusting The Volume Of Ptt Broadcasts; Changing Where Broadcasts Are Played; Updating The Default Channel; Updating Channel Subscriptions - Polycom SoundPoint IP 32x User Manual

If you release the Talk soft key without pressing the End PTT soft key:
• You can resume the broadcast by pressing and holding the Talk soft key (if the broadcast is in a
wait period).
• You can't initiate another broadcast on another channel until the waiting period ends.
If you press the End PTT soft key:
• You can't resume the broadcast by pressing and holding the Talk soft key.
• You can immediately initiate another broadcast on another channel.

Adjusting the Volume of PTT Broadcasts

You can adjust the volume of PTT broadcasts while they play. During a broadcast, press either Volume
Up or Volume Down to raise or lower the volume of the broadcast.
If you adjust the volume of a non-emergency broadcast, your phone retains the adjusted volume for all
subsequent non-emergency broadcasts. However, only system administrators can adjust the volume
level of an Emergency broadcast.

Changing Where Broadcasts are Played

While you send a broadcast, you can pick up the handset or press the Speakerphone or the Headset key
and continue speaking. You can also press the Microphone Mute key to mute your audio so that the
people receiving your broadcast won't hear anything. This behavior is similar to a phone call.
When you listen to a broadcast, you can pick up the handset or press Speakerphone or the Headset key
and continue listening to the broadcast.

Updating the Default Channel

If you press and hold the Talk soft key, your broadcast will automatically transmit on the default
channel, Channel 1. If you want, you can change the default channel.
To update the default channel:
1 Press the Menu key, then select Settings > Basic > Preferences > Paging/PTT Configuration >
PTT Push To Talk.
2 On the PTT Channel Configuration screen, select Default Channel and press the Edit soft key.
3 Use the dial pad to enter the default channel you want to use.
4 Press the Ok soft key.

Updating Channel Subscriptions

You can subscribe to any channel that has been enabled by the system administrator and appears in
your channels list. When you subscribe to a channel, you can send and receive PTT broadcasts on that
channel.
Chapter 3: Using the Advanced Features of Your Phone
61