Handling Multiple Calls On Hold; Transferring Calls; Performing A Consultative Transfer - Polycom SoundPoint IP 32x User Manual

Handling Multiple Calls on Hold

If multiple calls are on hold, use the up and down arrow keys to switch between the calls, then press the
Resume soft key to resume the desired call.
If two or more calls are on hold, an indication appears on the graphic display, for example '3/4',
indicating that this is the third call out of four calls.
If calls are on hold on more than one Line Key, all calls are combined into a single call list. The Line Key
that a call is associated with is indicated by the line icon in reverse colors. Pressing a Line Key with calls
on hold will place the current active call on hold and resume the first call on that Line Key.

Transferring Calls

You can transfer a call in one of three ways:
• Consultative transfer—The party to whom you want to transfer the call answers their phone
before you transfer the call or hang up. You can consult with them before completing the transfer.
See Performing a Consultative
• Blind transfer—The call is automatically transferred after you dial the number of the party to
whom you want to transfer the call.
See Performing a Blind
• Attended transfer—The parties are automatically connected to each other after you exit the
conference call.
Set up a conference call and then end your participation. For more information, see
Conferences.

Performing a Consultative Transfer

Perform a consultative transfer if you want to talk to the party to whom you're transferring the call. Or,
you can choose not to talk to the party. In this case, you wait for the party's ring-back sound, and then
transfer the call.
Transfer.
Transfer.
Chapter 2: Using Your Phone
Setting Up
21