Enabling The Headset Memory Mode - Polycom SoundPoint IP 650 User Manual

User Guide for the SoundPoint IP 650 Desktop Phone

Enabling the Headset Memory Mode

2 - 6
7. Select Maximum Intensity.
8. Press the Up or Down soft keys to increase or decrease the backlight
intensity.
9. Press the Ok or Cancel soft keys to accept or cancel changes.
10. Press
This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press
2. Select Settings > Basic > Preferences > Headset... > Headset Memory...
3. Use or
4. Press
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
to return to the idle display.
.
to select Enabled, and then press the Select soft key.
to return to the idle display.