Enabling The Headset Memory Mode; Selecting The Correct Headset For Electronic Hookswitch - Polycom VVX 500 Owner's Manual

9. Tap save to accept changes.
10. Press and

Enabling the Headset Memory Mode

This feature is especially useful for permanent or full-time headset users.
To permanently enable the Headset Memory Mode:
1. Press .
2. Select Settings > Basic > Preferences > Headset... >
Headset Memory...
3. Tap Enabled to change the setting.
4. Press to return to the idle display.
Repeat steps 1 to 4 to select Disabled and turn Headset Memory Mode off.
To activate Headset Memory Mode:
Press twice.
The flashing headset icon on the graphic display or a flashing headset key
indicates that the headset mode is activated. If the
analog headset is detected by the phone and in use. If the
a USB headset is detected and in use. If both an analog and USB headset is
in the phone, the phone will choose the USB by default. Tap Answer to
receive a call will now connect to your headset automatically.

Selecting the Correct Headset for Electronic Hookswitch

This feature allows you to answer your phone when you are using a headset.
42
to return to the idle display.
glows green an
is glowing blue
Owner's Manual