Basic Phone Features Placing A Call Answering A Call Using the Handset: Using the Handset: Pick up the handset and enter the number or Pick up the handset. enter the number first, and then pick up the Using the Speakerphone: handset.
Microphone Mute When a conference has been established, pressing the Split soft key will split the During a call, press . Mute applies to all modes: conference into two calls on hold. handset, headset, and hands-free. You can hear all other parties while Mute is enabled. Placing the call on hold on the conference To turn off Mute, press again.
Call Transfer Call Forwarding Trans To enable call forwarding: 1 During a call, press the soft key (the active call is placed on hold). 1 Press and select Features, and then Forward. Press the Blind soft key to transfer the call 2 Select a Forwarding Type from Always,...
Redial Call Lists Press to display the Placed Call list. Press Press and select Features, and then select or hold down to scroll to Call Lists. The Received and Placed Call lists can search for the desired number, and then press the be viewed.
Speed Dialing 9 Press to end data entry. 10 Press the Cancel soft keys to accept Contact To assign a speed dial index, see or cancel changes. Directory below. 11 Press repeatedly to return to the idle To dial a contact assigned to a line key, press the display.
Volume Adjustment Distinctive Ringing / Call Treatment Press the volume keys to adjust handset, headset, and handsfree speaker volume during a You can set distinctive incoming ringing tones for call. Pressing these keys in idle state adjusts the different contacts in your local directory. ringer volume.
Need help?
Do you have a question about the SoundPoint IP 32x and is the answer not in the manual?
Questions and answers