Programming Presets With The Web Interface - GE Legend IP User Manual

30 Legend IP
User Manual
Figure 23. Preset programming page
3. Select Presets.
4. Select the Edit tab.
5. Select a preset number.
6. Select Program.
7. Use the joystick to pan, tilt, and zoom the camera to the desired view.
8. Press the iris+ or set (
cancel the preset position. Both canceling and saving the preset position returns you to the Edit page.
9. After you have saved a preset position, then you can use the features on the Edit, Display, and
Advanced tab pages to customize the preset's title, duration, and exposure settings. See
on page 59.

Programming presets with the web interface

To program presets with the web interface, do the following:
1. Start the web interface and log in. See
2. Use the onscreen directional buttons to pan, tilt, and zoom the camera to the desired view.
3. Set the Index slider bar to the desired number.
4. Press the Preset store button to assign that position to the preset number.
) key on the keypad to save the preset position or press the iris- or esc key to
Using a computer on page 10.
Presets page