System Configurations - GE Legend IP User Manual

Cameras operate using the housing's memory, since programming is now stored in the housing. This allows you
to replace cameras or move them between housings without having to reprogram them for each new site.
Note: Be aware that the installer through the Installer passcode may have turned on passcodes during installation to protect
the dome against unauthorized access. Using passcodes is optional, however. They are off by default. For details, see
Passcode page on page 35.
Figure 1. Main menu of the graphical programming interface

System configurations

Digital Legend IP domes can be used in a variety of digital and analog system configurations. They have both
digital and analog connections for video and data. They also still maintain their built-in receivers that decode
analog commands originating from a compatible controlling devices, such as a keypads or ASCII control
software. See Operational overview on page 2.
Chapter 1 3
Introduction