Keypad Shortcuts - GE Legend IP User Manual

24 Legend IP
User Manual

Keypad shortcuts

The following are keypad shortcut commands carried over from CyberDome programming. Where keypad
shortcuts exist for a feature, such as setting presets, you can use keys from the keypad, instead of menus from
the programming interface, to program the feature. See Table 2. You can then go into the programming
interface and customize the programmed feature with titles and other attributes.
Table 2.

Keypad shortcuts

Command
Set a preset
Set the left autopan limit
Set the right autopan limit
For details, see the KTD-405 Controller Keypad User Manual (1036547).
a
See Autopan limitations
Keypad shortcut
a
store | (number) | store
Note: Storing presets with the KTD-400 or
KTD-404 must be done using the
Legend IP analog interface.
store | | store
Note: On the KTD-400 or KTD-404, move
the camera to the limit, press and
hold the Zoom In and Zoom Out
buttons, and press the pan button
(KTD-400) or the joystick (KTD-404)
in the direction of the limit.
store | | store
Note: On the KTD-400 or KTD-404, move
the camera to the limit, press and
hold the Zoom In and Zoom Out
buttons, and press the pan button
(KTD-400) or the joystick (KTD-404)
in the direction of the limit.
on page 99 for restrictions for setting autopan limits.