Download Print this page

GE Wireless Color Camera with Receiver 45234 User Manual

Home monitoring wireless color camera with receiver.
Hide thumbs


Home Monitoring
Wireless Color
Camera with
User Manual


   Also See for GE Wireless Color Camera with Receiver 45234

   Related Manuals for GE Wireless Color Camera with Receiver 45234

   Summary of Contents for GE Wireless Color Camera with Receiver 45234

  • Page 1

    45234 Home Monitoring Wireless Color Camera with Receiver User Manual 1-800-654-8483...

  • Page 2

    Thank you for purchasing the GE 45234 Wireless Color Camera System with Receiver. Please review these instructions carefully before attempting to operate the unit. PRODUCT FEATURES • “Wi-Fi” internet friendly wireless system—won’t interfere with home wireless networks • View up to two cameras automatically •...

  • Page 3

    1. 45233 Wireless Color Camera 2. 45234 Wireless Receiver 3. Wall plate and mounting hardware for camera 4. 2 AC adapters 5. AV cable BEFORE YOU INSTALL When choosing the best location for the placement of the camera and receiver, it is best to avoid any sources of possible RF interference such as microwave ovens and cordless phones.

  • Page 4

    indoor or outdoor use. When choosing a mounting location, please be advised: • Do not use in wet locations. If using outside, position camera in a sheltered location. • Do not position the camera so that it points directly into the sun or any bright light, as this may cause damage to the camera.

  • Page 5

    reduced due to interior walls, wiring, household fi xtures and metal plumbing. CONNECTING TO A TV OR MONITOR To prepare for installation of the system, we recommend that you temporarily connect the 45234 Receiver to a TV or Monitor to help you choose the best location for installing the camera.

  • Page 6

    plug to the yellow VIDEO IN jack and the white plug to the white AUDIO IN jack. 2. Plug the AC adapter into the power jack (marked on the back of the receiver, then into an AC outlet. 3. Loosen the antenna nut and rotate the antenna to a vertical position.

  • Page 7

    1 2 1/2 RECEIVER Channel Setting CAMERA 1 CAMERA 2 Channel Setting Channel Setting cannot be on the same channel or the signals will cancel out. Multi-Camera Operation This wireless surveillance system is designed to work with up to 2 cameras. Additional cameras are sold separately.

  • Page 8

    Auto Mode (2 Camera Operation) To have the receiver automatically switch between two active channels, fi rst check the receiver is set to 1/2 position. Next, press the AUTO button on the top panel of the receiver. The green LED will light and the receiver will automatically select between the two active cameras.

  • Page 9

    ‘see’ in the dark. Night Vision will appear as a Black and White image. When the image sensor detects enough light, color will return to the images. AUDIO DETECTION AND NOTIFICATION FEATURE This feature allows the system to emit an audio alert whenever sound is detected within a monitored area.

  • Page 10: Desktop Mount

    Desktop Mount: 1. Place camera in desired location on a fl at surface. 2. Set Channel switch on camera to 1 or 2. 3. Power ON the TV/monitor; reconnect AC adapter to the camera. 4. Select the channel (1 or 2) on the receiver that corresponds to the camera channel setting.

  • Page 11

    plate to the wall. Do not run the adapter cable in walls; when securing the cable, do not cut or puncture. 3. Set Channel switch on camera to 1 or 2. Slide the camera onto the alignment and locking pins of the mounting plate.

  • Page 12

    Power Power Shown with optional rechargeable battery (Sold separately) OPTIONAL WIRELESS BATTERY PACK AVAILABLE (SOLD SEPARATELY) Rechargeable NiMH Battery is available for use with the 45233 Wireless Color Camera. This 850mAh battery will power the 45233 camera for approximately 5 hours on a single charge.

  • Page 13

    TROUBLE SHOOTING If you are having trouble operating this product, please consult the guide below. If you have any questions or feel the camera system is not operating correctly, or you simply need additional information, please visit our web site, or contact our Customer Service Group 1-800-654-8483.

  • Page 14

    range, and that no large obstructions are blocking the signal. 2. Try repositioning the camera, receiver or both to improve the reception quality. 3. If a camera is positioned close to the receiver point antenna away from the receiver. 4. Reposition other nearby equipment transmitting on the 900MHz frequency.

  • Page 15

    Operating Temperature ...14°F to 104°F (-10°C to 40°C) Humidity ...Less than 85% WARRANTY ONE-YEAR LIMITED WARRANTY: Jasco Products Company warrants this product to be free from manufacturing defects for a period of one year from the original date of consumer purchase. This warranty is limited...

  • Page 16

    - Consult the dealer or an experienced radio/TV technician for help. is a trademark of General Electric Company and is used under license to Jasco Products Company LLC, 10 E. Memorial Road, Oklahoma City, OK 73114

Comments to this Manuals

Symbols: 0
Latest comments:
  • Krystal Robertson Oct 14, 2018 06:47:
    I purchased one of y'alls GM security wireless cameras from someone over the internet didn't receive the receiver is my warranty still doable can y'all send me a replacemen​t since I never had one given to me in the first place or do I have to take that up with who I bought it from
  • Matt Aug 03, 2015 10:22:
    Yes does the GE receiver or is it compatible with other brands of cameras like swann wireless