Shadowtours - GE Legend IP User Manual

ShadowTours

You have a total of 16 ShadowTours (totaling 20 minutes) that you can define for the dome. A ShadowTour is
a tour that the camera learns by recording your manual operation of the camera. Use a keypad to manually
direct the camera through the desired PTZ movements. The camera stores those movements in memory. The
recorded tour can be replayed at any time.
To program ShadowTours with the programming interface, do the following:
1. Access the programming interface.
2. Select Actions by guiding the joystick to move the cursor over the Actions menu and twisting the
joystick knob.
Figure 24. ShadowTour programming page
3. Select ShadowTours.
4. Select a ShadowTour number.
5. Select Program.
6. Press and release the set ( ) key on the keypad to start the ShadowTour timer.
7. Use the joystick to manually direct the camera through the desired PTZ movements
8. Press the iris+ or set (
cancel the ShadowTour. Both canceling and saving the ShadowTour returns you to the ShadowTour
page.
9. After you have saved a ShadowTour, then you can use the features on the ShadowTour page to
customize the tour's title. See
10. After programming your tours, you can verify tours from within the programming interface by
selecting a tour number and Show.
) key on the keypad to save the ShadowTour or press the iris- or esc key to
ShadowTours page on page 66.
Chapter 4 31
Basic programming