GE Legend IP User Manual page 52

44 Legend IP
User Manual
• During action: Displays the temperature warning only while the temperature is above the threshold.
• Indefinite: Displays the temperature warning even after the temperature drops below the threshold.
Low temp warning. The Low temp warning feature allows you to display a low-temperature reading on
the monitor screen when the temperature in the dome has reached a set low threshold. Place a
checkmark in the checkbox to display this warning. The threshold and duration features then become
available.
Threshold (low-temp). The low-temperature Threshold feature allows you to set the low boundary of the
allowable temperature range for the dome. Choices are in 10-degree increments. Default is 0.
Duration (low-temp). The low-temperature Duration feature allows you to set how long the warning
appears on the monitor screen. Choices are During action (default) and Indefinite.
• During action: Displays the temperature warning only while the temperature is below the threshold.
• Indefinite: Displays the temperature warning even after the temperature rises above the threshold.
Coordinates page
You can display the dome's pan, tilt, or zoom coordinates on the monitor screen, if desired. You can display
any or all of the coordinates. You can also choose how to display each one.
To access the Coordinates page, select Setup, Preferences, and Coordinates.
Figure 33. Coordinates page
Note: Remember to select OK to save any changes you make on the page.
Pan. The Pan feature displays the pan coordinate of the dome. Choices are Off, Bearings (compass
directions, such as N, NE, E), Degrees 360 (default), and Degrees ± 180.