Title/Date Page - GE Legend IP User Manual

Title/Date page

The Title/Date page establishes the camera number, title, and installation date for the dome.
To access the Title/Date page, select Setup and Title/Date.
Figure 28. Title/Date page
Note: Remember to select OK to save any changes you make on the page.
Camera number. The programming interface reads the address number set in the camera with the rotary
address switches and displays that address as the camera number. The camera number is not editable.
Camera title. The Camera title box allows you to give each camera a unique title. There is a 60-character
limit for all titles, but be aware of how much video you want to cover with your titles.
Display title. The Display title feature enables or disables the display of individual camera titles on the
monitor screen. Choices are On (default) and Off.
Title POS. The camera title will appear on screen in a default position on the monitor screen (upper
center), but you can reposition it with the Title POS button. Be aware of where you already have other
titles (privacy masks, presets, tours, macros, areas, and alarms) positioned.
To set the position of the camera title:
1. Select Title POS.
2. Use the joystick to move the title to the desired position.
3. Press the iris + or the set (
the esc key to cancel the new position.
Title font color. The camera title will appear on screen in the color selected. Choices are as shown
onscreen. Default is White.
Title font size. The camera title will appear on screen in the font size selected. Choices are as shown
onscreen. Default is 14 pt.
) key on the keypad to save the new position or press the iris - or
Chapter 5
Advanced programming
37