GE Legend IP User Manual page 25

5. Continue entering commands with the
joystick.
6. If passcodes are turned on, they are required. Select your passcode level and enter your passcode
(Figure 17). You will be taken to the main programming page. If passcodes are turned off, they are not
required and you will be taken directly to the main programming page.
From the main programming page, you can access any programming parameters that are allowed by
your passcode.
Figure 17. Log on (if passcode required) and main programming pages
Accessing the programming interface
Figure 16. SEE MONITOR FOR MENUS display
SEE MONITOR FOR MENUS
HOLD SEQ (3 SEC) TO EXIT
Chapter 2 17