Accessing Programming Menus; Navigating Menus With The Keypad - GE CyberDome II User Manual

Hide thumbs Also See for CyberDome II:

Table of Contents

Accessing programming menus

To access the programming menus using a KTD-405 keypad, do the following:

1. Switch the keypad to the camera site you want to program (Figure 2).

2. Press and hold the set key until the Enter programming code display appears.

3. At the code entry display, enter the programming code 9, 5, and 1. Then press the seq button.

4. At the first menu display, press 3.

5. At the Enter camera site number screen, enter the site number of the camera you wish to program.

Figure 2. KTD-405 keyboard

At this point, you have access to the CyberDome II programming menus. For more information on the

programming menus, see

You can use multiple methods to navigate through the menu system with your keypad. Use either the keypad

joystick, or the pause or play buttons to move up or down and advance through the menu systems.

When you have the desired menu option selected, use either the joystick or the seq button to pan right to

advance. You may also be able to press the number associated with your desired menu selection to proceed to

highlight that option or the next menu.

Note:

When you press the number associated with an option and there is a value to set, you will automatically be asked to set

that value. If there is no value to set, when you press the number associated with an option, that option will be selected

and you will proceed to the next menu.

The arrow indicator identifies the property that will be changed. To change a setting, press the iris + button. If

you change the setting of the property the arrow indicator is on and advance to the next menu, the setting will

be saved. Alternatively, you may be able to use the zoom + button to advance.

Note:

The alternative methods to navigate and select may not work in all menus or with all controlling devices.

When you're in a menu, use the joystick and pan left to back out of the menu screen. When you're performing

a function, like setting a mask, or setting an area title, press the iris - button to back out of the function to a

menu screen.

on page 3.

Chapter 1

Programming

Table of Contents