Error Codes; Abnormal Exit Motor - Lexmark C925 Service Manual

5041-030

Error codes

Note: In addition to the 1xx and 9xx error codes, this device displays a symptom where the device shuts down
repeatedly. The main symptom of this error is the switch going to the off position automatically when the device
PORs. This is due to a fuser and printhead controller abnormality. If this symptom is displayed see
switch automatically switching to the Off position service check" on page
1xx error codes
121.01 Abnormal thermistor 1
121.02 Abnormal thermistor 2
140.01 Abnormal main motor

149.01 Abnormal exit motor

172.01 Abnormal power supply
fan
173.01 Abnormal machine fan
121.05 Abnormal heater
146.01 Tray 1 error
146.03 Tray 3 error
146.04 Tray 4 error
146.05 Tray 5 error
121.04 Abnormal belt thermistor
113.01 HDCONT M-HEAD error
112.01 HDCONT C-HEAD error
114.01 HDCONT Y-HEAD error
111.01 HDCONT K-HEAD error
121.03 Abnormal thermistor 3
171.01Abnormal fuser fan
174.01 Abnormal rear fan
130.xx Abnormal High Voltage
unit
136.xx Abnormal temperature
and humidity sensor
126.xx Abnormal power switch
132.xx Abnormal theta sensor
132.00 Density sensor error
2-26
Service Manual
Action
See "121.01 Thermistor 1 error" on page
See "121.02 Thermistor 2 error" on page
See "140 Drive motor error" on page
See "149.01 Fuser / paper exit motor error" on page
See "172.01 - Power supply unit fan error" on page
See "173.01 - Main unit fan error" on page
See "121.05 Fuser - fuser heater error" on page
See "146.01 Tray1error" on page 2-36
See "146.03 Tray 3 error" on page
See "146.04 Tray 4 error" on page
See "146.05 Tray 5 error" on page
See "121.04 Belt thermistor error" on page
See "113.01 Magenta printhead error" on page
See "112.01 Cyan printhead error" on page
See "114.01 Yellow printhead error" on page
See "111.01 Black printhead error" on page
See "121.03 Thermistor 3 error" on page
See "171.01 Fuser fan error" on page
See "174.01 Rear fan error" on page
See "130.xx High voltage power supply error" on page
See "136.xx Temperature humidity sensor error" on page
See "126.xx Power switch error" on page
See "132.xx Abnormal theta sensor" on page
See "132.00 Density sensor error" on page
"ON / OFF
2-59.
2-30.
2-30.
2-35.
2-35.
2-39.
2-39.
2-32.
2-36.
2-37.
2-38.
2-31.
2-29.
2-29.
2-29.
2-29.
2-31.
2-38.
2-39.
2-32.
2-35.
2-32.
2-34.
2-33.
Previous
Next
Go Back