Error Codes And Messages - Lexmark C522 Service Manual

Error codes and messages

Service error codes and paper jam messages
Error code
1xx service error codes
110.01–110.06 Mirror
Motor
111.01–111.05
Printhead Error
112.01–112.05
Printhead Error
113.01–113.05
Printhead Error
114.01–114.05
Printhead Error
120.01–120.02 Fuser
Error
120.03 Fuser Error
120.04–120.07 Fuser
Error
120.08–120.10,
120.13–120.15 Fuser
Error
140.03–140.08
Autocomp Motor Error
142.09–142.18,
142.20–142.25, 142.27
Motor Error
143.09–143.18,
143.20–143.25
Motor Error
144.09–144.18,
144.20-144.25
Motor Error
145.09–145.18,
145.20–145.25
Motor Error
Description
A mirror motor error has occurred.
An error has occurred in the cyan
channel of the printhead.
An error has occurred in the magenta
channel of the printhead.
An error has occurred in the yellow
channel of the printhead.
An error has occurred in the black
channel of the printhead.
An error has occurred in the fuser.
An error has occurred in the fuser.
An error has occurred in the fuser.
An error has occurred in the fuser.
Tray 1 motor has failed.
Fuser motor has failed.
EP Drive assembly cartridge 1 motor
has failed.
EP Drive assembly cartridge 2
(bottom) motor has failed.
Bump aligner motor has failed.
Action
POR the printer. If the error message persists, see
"110.xx—Mirror motor service check" on
page 2-27.
POR the printer. If the error message persists, see
"111.xx, 112.xx, 113.xx, and 114.xx—Printhead
error service check" on page
POR the printer. If the error message persists, see
"111.xx, 112.xx, 113.xx, and 114.xx—Printhead
error service check" on page
POR the printer. If the error message persists, see
"111.xx, 112.xx, 113.xx, and 114.xx—Printhead
error service check" on page
POR the printer. If the error message persists, see
"111.xx, 112.xx, 113.xx, and 114.xx—Printhead
error service check" on page
Remove and reseat the fuser. POR the printer. If the
error message persists, see
120.08–120.10, 120.13–120.15—Fuser error
service check" on page 2-28.
Remove and reseat the fuser. POR the printer. If the
error message persists, see
service check" on page 2-30.
Remove and reseat the fuser. POR the printer.
Check the camshaft follower on the left side. If the
error message persists, see
Fuser error service check" on page
Remove and reseat the fuser. POR the printer. If the
error message persists, see
120.08–120.10, 120.13–120.15—Fuser error
service check" on page 2-28.
POR the printer. If the error message persists, see
"140.xx—Autocomp (tray 1) motor error service
check" on page 2-32.
POR the printer. If the error message persists, see
"142.xx and 906.01–906.04—Motor (fuser) error
service check" on page 2-33.
POR the printer. If the error message persists, see
"143.xx—Motor (EP drive assembly top
cartridge) error service check" on page
POR the printer. If the error message persists, see
"144.xx—Motor (EP drive assembly bottom
cartridge) error service check" on page
POR the printer. If the error message persists, see
"145.xx and 906.05–906.08—Motor (bump
aligner) error service check" on page
Diagnostic information
5022-xxx
2-27.
2-27.
2-27.
2-27.
"120.01, 120.02,
"120.03—Fuser error
"120.04–120.07—
2-30.
"120.01, 120.02,
2-34.
2-35.
2-36.
2-7