Diagnostics Mode; Entering Diagnostics Mode; Diagnostic Mode Menus - Lexmark C925 Service Manual

5041-030

Diagnostics mode

To run the printer diagnostic tests described in this chapter, put the printer in Diagnostics mode.

Entering Diagnostics mode

To enter the Diagnostics Mode:
1.
Turn off the printer.
2.
Press and hold 3 and 6.
3.
Turn on the printer.
4.
Hold the buttons until the splash screen appears.

Diagnostic mode menus

PRINT TESTS
Tray 1
Tray 2 (if installed)
Tray 3 (if installed)
Tray 4 (if installed)
Tray 5 (if installed
Multi-Purpose Feeder
Print Quality Pages
3-14
Service Manual
See "PRINT TESTS" on page 3-16
See "Print Quality Pages" on page 3-16
Previous
Next
Go Back