5041-030
Left side removals
ISP option board removal
CAUTION
Remove the power cord from the electrical outlet before you connect or disconnect any cable
or electronic board or assembly for personal safety and to prevent damage to the printer.
Disconnect any connections between the printer and PCs/peripherals.
1.
Remove the ISP access cover.
2.
Turn the screws on the RIP cage cover counterclockwise to remove them, and then pull the RIP w/ ISP
bracket cage cover down.
3.
Unplug the RIP cage fan from the RIP board.
4-36
Service Manual
Previous
Next
Go Back