Par 1 Strobe Adj; Reports; Event Log; Display Log - Lexmark C925 Service Manual

5041-030

Par 1 Strobe Adj

Parallel Strobe Adjustment enables you to change the amount of time the strobe is sampled in order to
determine if data is available on the parallel port. Increasing the value increases the amount of time by 50 ns per
increment. Decreasing the value decreases the sample time by 50 ns per increment.
Touch Back to return to the Diagnostics menu.

REPORTS

From this menu you can print the Menu Settings Page or the Event Log.

EVENT LOG

Display Log

Display Log shows the message that appeared on the operator panel for each event in the log, starting with the
most recent. Use the touch-screen arrows to scroll through the log entries. To see more in-depth information
about each event, print the event log using the Print Log menu item.
Touch Back to return to the EVENT LOG menu.

Print Log

The Print Log menu item prints a detailed report of each event in the log. The first page of the event log contains
a Printer Information section similar to what is printed on a Menu Setting Page. Printed at the top of each page is
the model name and serial number to assist in tracking each page of a report to a specific printer. The printout of
the log contains the following information for each error in the log:
•
Page count when the error occurred (except for 900 service RIP software errors).
•
Code versions of all packages when error occurred.
•
Panel message when error occurred (except for 900 service RIP software errors).
•
Debug information and secondary error codes, depending on the error.
3-22
Service Manual
925
Previous
Next
Go Back