Esc @ Initializes The Printer. (Epson) - Compuprint MDP 30FB Programmer's Manual

ESC @
Initializes the printer. (EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
This sequence causes the printer to be initialized. This command, inserted in the input
buffer, will be executed during data processing, so that data preceding this command
will be printed according to the previous setting.
It causes the printer:
• To go back to the current printer setup settings
• To cancel any print attributes selected
• To initialize the printer carriage
• To reset the column counter
• To set the horizontal tabulations every 8 columns
• To clear all vertical tabulations
Only the selection of Draft/Quality printing, DDL and the selected character generator
are maintained.
ESC @
1B 40
27 64
88