Table of Contents
Advertisement
DC1
Selects printer. (IBM)
ASCII Code
DC1
Hexadecimal Value 11
Decimal Value
17
This command causes the printer to be enabled after it has been disabled by the ESC
Q command.
DC1
Selects printer. (EPSON)
ASCII Code
DC1
Hexadecimal Value 11
Decimal Value
17
This command causes the printer to be enabled after it has been disabled by the DC3
command.
DC3
Deselects printer. (EPSON)
ASCII Code
DC3
Hexadecimal Value 13
Decimal Value
19
This code deselects the printer. The printer remains deselected until it receives a DC1
command or power is turned off then on again. The printer ignores the ESC @
command (initialize printer) when it is deselected.
84
Advertisement
Table of Contents
Need help?
Do you have a question about the MDP 30FB and is the answer not in the manual?