Esc Sp Sets Intercharacter Space. (Epson); Esc X Sets Left And Right Margins. (Ibm) - Compuprint MDP 30FB Programmer's Manual

ESC SP
Sets intercharacter space. (EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
Range
This command sets the intercharacter space to n/120 inch in Draft printing and n/180
inch in Quality printing.
ESC X
Sets left and right margins. (IBM)
ASCII Code
Hexadecimal Value
Decimal Value
Range
This command specifies left and right margin positions. The n
indicate respectively the number of columns for the left and right margins at the
current spacing. These margins are memorized in terms of absolute displacement from
the physical left edge of the page.
If n is equal to 0, the current left margin of the page is used. If n
1
current right margin of the page is used. The left margin value must be less than the
right margin value. The right margin value must not exceed the physical right edge of
the paper; otherwise the maximum acceptable value for the right margin will be set.
ESC SP n
1B 20 n
27 32 n
0 < n < 127
ESC X n n
1 2
1B 58 n n
1 2
27 88 n n
1 2
0 < n n < 255
1, 2
33
and n parameters
1 2
is equal to 0, the
2