Esc S Sets Subscript Or Superscript Printing. (Ibm, Epson) - Compuprint MDP 30FB Programmer's Manual

ESC S
Sets subscript or superscript printing. (IBM, EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
Selects the subscript or the superscript printing. See the following table:
n Selection
1 Subscript Print enabled
0 Superscript Print enabled
The proportional printing of the subscript or superscript characters is performed at 2/3
of the proportional character width. Use the ESC T command to cancel super/subscript
printing.
ESC S n
1B 53 n
27 83 n
53