Esc G Sets Double Strike Printing. (Ibm, Epson); Esc G Sets 15 Cpi. (Epson); Esc H Cancels Double Strike Printing. (Ibm, Epson) - Compuprint MDP 30FB Programmer's Manual

ESC G
Sets double strike printing. (IBM, EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
This command starts double-strike printing. ESC G must be canceled by ESC H.
ESC g
Sets 15 CPI. (EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
Subsequent data will be printed at 15 cpi. This command is accepted at any position
within the line. This command resets the horizontal motion index (HMI) set with the
ESC c command. If you change the pitch during proportional mode (selected with the
ESC p command) the change takes effect when the printer exits proportional mode.
ESC H
Cancels double strike printing. (IBM, EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
This command cancels double-strike printing with the ESC G command.
ESC G
1B 47
27 71
ESC g
1B 67
27 103
ESC H
1B 48
27 72
48