Esc P Sets Or Cancels Proportional Printing. (Epson) - Compuprint MDP 30FB Programmer's Manual

ESC P
Sets or cancels proportional printing. (IBM)
ASCII Code
Hexadecimal Value
Decimal Value
This code is a terminator code; when received it causes all data in the print buffer to
be printed out. Then if n parameter is equal to 1, the subsequent data is printed in
proportional mode. If n parameter is equal to 0, proportional mode is reset.
If the any horizontal spacing command is sent to the printer when the proportional
printing is set, the command will be stored and will be activated as soon as the
proportional printing will be reset.
ESC p
Sets or cancels proportional printing. (EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
This command selects the proportional or fixed spacing according to the following
values:
n Proportional Printing
0 Returns to current fixed character pitch
1 Selects proportional character spacing
ESC P n
1B 50 n
27 80 n
ESC p n
1B 70 n
27 112 n
51