Esc [ G High Resolution Graphics. (Ibm) - Compuprint MDP 30FB Programmer's Manual

m n
0 (K): ESC K graphic command
1 (L): ESC L graphic command
2 (Y): ESC Y graphic command
3 (Z): ESC Z graphic command
ESC [ g
High Resolution Graphics. (IBM)
ASCII Code
Hexadecimal Value
Decimal Value
This command sends data for dot matrix graphics to the printer and allows the
selection of eight modes for both 8-wire graphics and 24-wire graphics.
n (count) Count is a two-byte value in the format of low byte, high byte that
gives the number of bytes of graphic data plus one.
m (mode) Mode is a one-byte value to select the graphics mode. Modes have a
vertical wire count (8 or 24) and a horizontal density in dots per inch.
See the following table:
ESC [ g n m data
1B 5B 67 n m data
27 91 103 n m data
77