Esc M Selects 10.5 Point, 12 Cpi. (Epson); Esc P Selects 10.5 Point, 10 Cpi. (Epson) - Compuprint MDP 30FB Programmer's Manual

ESC M
Selects 10.5 point, 12 cpi. (EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
This command selects 10.5-point, 12-cpi character printing. It resets the horizontal
motion index (HMI) set with the ESC c command. If you change the pitch during
proportional mode (selected with the ESC p command) the change takes effect when
the printer exits proportional mode.
ESC P
Selects 10.5 point, 10 cpi. (EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
This command selects 10.5-point, 10-cpi character printing. It resets the horizontal
motion index (HMI) set with the ESC c command. If you change the pitch during
proportional mode (selected with the ESC p command) the change takes effect when
the printer exits proportional mode.
ESC M
1B 4D
27 77
ESC P n
1B 50 n
27 80 n
50