Table of Contents
Advertisement
ESC B
Sets vertical tabs. (IBM, EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
Range
In EPSON mode, sets vertical tab stops in the 0 Vertical Format Unit (VFU) channel.
This code sets up to 16 vertical tab stops at the line specified by n
0 VFU channel. The tab stops are memorized as physical positions.
In IBM modes, this code sets up to 64 vertical tab stops at the line number specified by
n
, n
and so on in the 0 VFU channel. The line at top of form is line 1. The tab stops
1
2
are memorized as logical positions.
ESC C 0
Sets form length to n inches. (IBM, EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
Range
This command sets the form length to the number of inches specified by n. The current
position of the paper is assumed as top of form. Setting the paper length cancels the
top and bottom-margin settings.
ESC B n
... n
0
1
x
1B 42 n
... n
00
1
x
27 66 n
... n
0
1
x
1 < n < 255
ESC C 0 n
1B 43 00 n
27 67 0 n
1 < n < 22
26
, n
and so on in the
1
2
Advertisement
Table of Contents
Need help?
Do you have a question about the MDP 30FB and is the answer not in the manual?