Esc \ Prints Characters From All Characters Table. (Ibm); Esc ^ Prints A Single Character From The All Characters Table. (Ibm) - Compuprint MDP 30FB Programmer's Manual

ESC \
Prints characters from all characters table. (IBM)
ASCII Code ESC \ n
1B 5C n
Hexadecimal Value
Decimal Value 27 92 n
Range 0 < n
0 < n
This command prints the next n
characters.
The total number of characters that will be printed from the table of all printable
characters is equal to n
table of all printable characters: n
long as this sequence is active. The space character is printed as an unassigned
character.
ESC ^
Prints a single character from the all characters table. (IBM)
ESC ^ n
ASCII Code
Hexadecimal Value 1B 5E n
27 94 n
Decimal Value
0 < n < 255
Range
This command prints the next character from the all characters table. This sequence
prints only one character from the all character table.
n
1 2
n
1 2
n
1 2
< 255
1
< 255
2
+ n x 256 characters from the table of all printable
1 2
+ (n x 256). For example, to print 300 characters from the
1 2
= 44, n = 1. The control codes are not recognized as
1 2
63