Esc Si Selects Condensed Mode. (Ibm, Epson); Esc So Sets Double Width Printing (One Line). (Ibm, Epson) - Compuprint MDP 30FB Programmer's Manual

ESC SI
Selects condensed mode. (IBM, EPSON)
ASCII Code ESC SI
Hexadecimal Value 1B 0F
Decimal Value 27 15
This command selects the condensed mode in which character width is reduced as
follows:
→
10 CPI
→
12 CPI
→
Proportional
DC2 code cancels the condensed printing. This command resets the horizontal motion
index (HMI) set with the ESC c command.
ESC SO
Sets double width printing (one line). (IBM, EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
This code causes subsequent data in the same line to be printed as double width
characters. It is canceled by the LF, VT, FF, DC4 and ESC W 0 commands or when
the buffer is full. This command resets the horizontal motion index (HMI) set with the
ESC c command.
17.14 CPI
20 CPI
½ width
ESC S0
1B 0E
27 14
54