Esc ] Sets A Reverse Line Feed. (Ibm); Esc 5 Sets An Automatic Line Feed After A Carriage Return. (Ibm) - Compuprint MDP 30FB Programmer's Manual

ESC ]
Sets a reverse line feed. (IBM)
ASCII Code
Hexadecimal Value
Decimal Value
This code is a terminator code; when received, it causes the current contents of the
print buffer to be printed out, before reversing the paper by one line at the current
vertical spacing. If no data precedes this command or if the preceding data consists of
spaces, the code causes only a reverse line feed to be performed. When the line counter
is equal to or less than the top of the form value, the ESC ] is ignored.
ESC 5
Sets an automatic line feed after a carriage return. (IBM)
ASCII Code
Hexadecimal Value
Decimal Value
If n is equal to 1, this command sets an automatic line feed on receiving of a CR code.
If n is equal to 0, this command cancels the automatic line feed.
n Automatic line feed
0 Disabled
1 Enabled
ESC ]
1B 5D
27 93
ESC 5 n
1B 35 n
27 53 n
10