Esc W Sets Or Cancels Double Height Printing. (Epson); Esc X Selects Font By Pitch And Point. (Epson) - Compuprint MDP 30FB Programmer's Manual

ESC w
Sets or cancels double height printing. (EPSON)
ASCII Code
Hexadecimal Value
Decimal Value
Range
Enables or disables the double-height printing of all characters. The first line of a page is not
doubled if the ESC w command is sent on the first line; all following lines are printed at
double-height. See the following table:
n Selection
1 Double Height Printing enabled
0 Double Height Printing disabled
ESC X
Selects font by pitch and point. (EPSON)
ESC x m n
ASCII Code
Hexadecimal Value 1B 58 m n
Decimal Value 27 88 m n
5 < m < 127
Range
0 < n
0 < n
This command puts the printer in scalable font mode and selects the pitch (default
value 10 cpi) of the font according to the following formula:
ESC w n
1B 77 n
27 119 n
0 < n < 255
n
1 2
n
1 2
n
1 2
< 255
1
< 127
2
56