Choosing A Suitable Location - Compuprint 4247 Serial Quick Setup Manual

Choosing a suitable location

Consider the following points when you choose the location for your printer:
v The distance between the printer and the host computer must not exceed the
length of the interface cable. The location must be sturdy, horizontal and stable
v Your printer must not be exposed to direct sunlight, extreme heat, cold, dust or
humidity (see "Printer Specifications" in the User's Guide you find on the
CD-Rom)
v You need a power outlet compatible with the plug of the printer's power cord.
v For best continuous forms stacking, the forms should be stacked on the floor or
on a surface below the base of the printer.
v For successful forms parking, the input forms stack must always be lower than
the base of the printer.
There must be sufficient
clearances on all sides for easy
operation. The required space is
shown in the following figure:
CAUTION:
The 4247 printer weighs 21 kg (46 lbs). Two persons are required to lift
it.
80 cm
31.5 in.
Setting up your printer
3