Connector 1 – Tv Loop Out - Strong SRT 5005 Instruction Manual

Connector 1 - TV Loop Out
For Aerial Signal Pass through
to your TV or VCR/DVD
This is the signal coming from your antenna and
passing through the SRT 5005
This can be used for a variety of purposes as per
items A and B as follows.
A. With a separately purchased RF Lead, you can
connect from this connector to your TV antenna IN.
This enables you to switch back to normal analogue
viewing. I.e. you would switch back to normal TV
analogue mode by pressing the TV Mode button on
your TV Remote Control.
B. You can choose to connect RF from this connector
to your VCR (separately purchased Lead) which will
enable you to watch a normal Digital Broadcast Channel
through the SRT 5005 and at the same time you can
record a different broadcast channel into the VCR.
Therefore, as you are watching your digital channel
through the SRT 5005 you would select a channel via
your VCR Remote Control and press Record Button
on your VCR.
E.g. you may be watching the Digital transmission of
CH 7 through the SRT 5005 as normal and recording
CH 9 RF analogue through your attached VCR.
22